Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,338   Posts: 1,537,713   Online: 784
      
Results 1 to 4 of 4
  1. #1
    Bruce Osgood's Avatar
    Join Date
    Sep 2002
    Location
    Brooklyn, N.Y. USA
    Shooter
    Multi Format
    Posts
    2,429
    Images
    45

    What Size is No. 0

    What size hole do you drill in a lens board to accomodate a No. 0 shutter? With or without jam nut?....Is this hole threaded?

  2. #2
    lee
    lee is offline
    lee's Avatar
    Join Date
    Nov 2002
    Location
    Fort Worth TX
    Shooter
    8x10 Format
    Posts
    2,913
    Images
    8
    look at skgrimes.com in the shutter part of the website. there are some mechanical drawings there that give the hole sizes.

    lee\c

  3. #3
    noseoil's Avatar
    Join Date
    Oct 2003
    Location
    Tucson
    Shooter
    Multi Format
    Posts
    2,898
    Images
    17
    Same size you would drill for a Bulm or Grass cabinet door hinge.

  4. #4
    Bruce Osgood's Avatar
    Join Date
    Sep 2002
    Location
    Brooklyn, N.Y. USA
    Shooter
    Multi Format
    Posts
    2,429
    Images
    45
    Quote Originally Posted by lee
    look at skgrimes.com in the shutter part of the website. there are some mechanical drawings there that give the hole sizes.

    lee\c
    Thanks Lee, it's all right there.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin