Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,295   Posts: 1,535,640   Online: 1110
      
Results 1 to 9 of 9
  1. #1
    Sean's Avatar
    Join Date
    Aug 2002
    Location
    New Zealand
    Shooter
    Multi Format
    Posts
    8,555
    Blog Entries
    7
    Images
    15
    Once I start producing some serious large format work, I'll want some kind of storage system to ensure my negatives could not be lost incase of a house fire. What type of solutions do you folks use? I checked with a security company in town who has some large used computer data safes available. These things are going cheap because they are a by product of the computer storage days when backup tapes were huge. There's one that is quite large, like 5 ft tall, 2 1/2 feet deep. It weighs like 800 pounds! The funny thing is that it's cheaper than a small Sentry fireproof box (that's New Zealand for ya). They'll deliver it for free. Supposedly it is rated for plastics and computer data tape within the safe to withstand a serious fire. I think I might go with the biggun. Just curious what solutions some of you use. Thanks!

  2. #2

    Join Date
    Sep 2002
    Shooter
    Large Format
    Posts
    4,530
    Sounds like a great safe, I have one of those gun safes and it is rated for 1500 F, but the inside can get as hot as 300 or 400 F....needless to say worthless....mine is about the same size you are mentioning and really are a good thing to have for other stuff too...like the camera.....since having guns in Mexico is a real hassle I sold all mine but kept the safe to guard my photo equipment. Houses in Mexico are made of brick so fires are not very common, but burglars are......Go for the big one, it is a real good deal mine was really expensive and not as good for fire as yours sound.

  3. #3

    Join Date
    Sep 2002
    Posts
    243
    You have to remember that the most safes aren't rated as "fireproof" but as "fire resistant." Big difference. And as Jorge pointed out, while the safe will protect the item from direct contact with the flames - that interior gets, mighty, mighty hot. I'm not sure if you can get an insulated safe that will keep the interior temperature at a point that wouldn't effect the film emulsion.

    I'm all for empirical testing for these type of questions. Why not take some scrap negs, put them in the oven at 400 F & see what happens? Then you'll know what to expect and whether the safe will really do you any good.

    If you do test this, I'd like to know the results.

  4. #4
    Sean's Avatar
    Join Date
    Aug 2002
    Location
    New Zealand
    Shooter
    Multi Format
    Posts
    8,555
    Blog Entries
    7
    Images
    15
    Yeah, the safe I was looking at was like 1200 pounds and designed to protect computer data tape in a big fire. So it claims to be insulated to a high degree of media protection for xx amount of minutes. They wanted 800NZ dollars for it. I was looking at one that was made by Sentry which was 1/10th the size and they wanted 1200NZ dollars for it! I figure data tape and film are very similar, tape is probably even more fragile than film when it comes to high heat. The big safe is probably overkill, but it's cheap and solid, etc. If I get it I'll post a pic.

  5. #5

    Join Date
    Sep 2002
    Posts
    243
    Well, I'm not sure that magnetic tape is more susceptible to heat than film. The film base itself should be relatively stable. I'd worry about the gelatin emulsion on the film sagging or even melting from the heat as it has an upper heat limit of about 120 - 140 F.

    Computer tape is Mylar with a ferric oxide coating (usually on both sides to prevent print through). The only thing that should be really susceptible to heat is the binder (glue) that holds the oxide coating on the Mylar backing -totally different than film.

    Can you find out the internal temperature rating for the safe? Should be XX internal temperature after XX amount of time exposed to an external temperature of XX?

  6. #6
    Sean's Avatar
    Join Date
    Aug 2002
    Location
    New Zealand
    Shooter
    Multi Format
    Posts
    8,555
    Blog Entries
    7
    Images
    15
    Good point. I'm not in the market for the safe until I move houses, but when the time comes again I'll definitely look into it. Thanks for the info, Sean

  7. #7

    Join Date
    Nov 2002
    Location
    Prague, Czech Republic
    Posts
    18
    Ross...
    Apart from fire proof safes, make sure you store the negs in a good archival storage system. I use the Mylar D sleeves and acid free boxes made by Light Impressions...they are really hard to beat. Gaylord also makes a good system. These products are a little expensive but well worth it.

    Larry D Horricks
    Prague, Czech Republic
    LD Horricks
    Prague,Czech Republic

  8. #8
    glbeas's Avatar
    Join Date
    Sep 2002
    Location
    Roswell, Ga. USA
    Shooter
    Multi Format
    Posts
    3,307
    Images
    109
    Another thing to consider is humidity. If your storage area is prone to high humidity a bag of silica gel thrown in will help, as long as you periodically restore it with a quick bake in the oven. I've had old negatives and slides riddled with fungus, and these were stored in sleeves.
    Gary Beasley

  9. #9
    Sean's Avatar
    Join Date
    Aug 2002
    Location
    New Zealand
    Shooter
    Multi Format
    Posts
    8,555
    Blog Entries
    7
    Images
    15
    yikes, that would be terrible.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin