Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,921   Posts: 1,584,963   Online: 1057
      
Results 1 to 2 of 2
  1. #1

    Join Date
    Nov 2003
    Posts
    5,243
    Images
    9

    What temp to flatten color prints

    I have some ciba prints that have taken on the shape of their tube. Now that I have a mounting press I want to use it to flatten them. Problem is I do not have any clue as to what temp to use. I assume it is lower than BW prints.
    Technological society has succeeded in multiplying the opportunities for pleasure, but it has great difficulty in generating joy. Pope Paul VI

    So, I think the "greats" were true to their visions, once their visions no longer sucked. Ralph Barker 12/2004

  2. #2
    Bob Carnie's Avatar
    Join Date
    Apr 2004
    Location
    Toronto-Ontario
    Shooter
    Med. Format RF
    Posts
    4,706
    Images
    14
    Mark
    I would not suggest using heat with Ciba. unless you are using the RC Version. the Melemex base should flatten well with out heat.
    Do not mount Cibachromes with the melemex base they will not adhere over time.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin