Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,506   Posts: 1,543,519   Online: 1020
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    artonpaper's Avatar
    Join Date
    Aug 2007
    Location
    Brooklyn, NY
    Shooter
    Multi Format
    Posts
    325
    Images
    135
    I too worked in a lab where we wet mounted prints to masonite. The prints were wet fiber based, mounted with wall paper paste. There was about an inch or so extra around the edges and we would wrap the the edges around the board. This technique can't be archival. I would use heat and foam core these days.

  2. #12
    AndreasT's Avatar
    Join Date
    Sep 2006
    Location
    Berlin
    Shooter
    Multi Format
    Posts
    355
    Until recently I worked in a lab here in Berlin. We wet monuted prints on Aluminiun using rice starch. Firstly the aluminium board was sanded well so that the starch can grip on the board. The print was placed wet on the board and flattened with a roll. Overnight it dried and was flat as a babys bottom. For me the nicest way of mounting a print. A bit expensive though. We made prints in the size of about 140x210 cm.
    I have also mounted prints on mat board. Sometimes the mat board tore itself apart because the tension of the dried print was stronger than mat glueing.
    Long, long ago I mounted dry prints, using glue, on mat board. Putting the glueon the board.
    The mounted prints wanted to curl up as mentioned in a post before.
    I framed the prints anyway because I had an exebihition. Everthing was fine and afterward when I removed the prints out of the frames, they were perfectly flat,unto this day over ten years later.
    It works but can be frustating.
    I am still working on optimising it.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin