Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,921   Posts: 1,584,874   Online: 1079
      
Results 1 to 2 of 2
  1. #1
    BetterSense's Avatar
    Join Date
    Aug 2008
    Location
    North Carolina
    Shooter
    35mm
    Posts
    2,883

    5x7 dry mount tissue

    Is it possible to buy dry mount tissue in 5x7 size?

    I print an lot of RC 5x7s for proofs, and sometimes they turn out very well and I'd like to be able to mount them. Can you dry-mount RC ok? It would be much convenient if I could just have pre-cut dry-mount tissue.
    f/22 and be there.

  2. #2

    Join Date
    Oct 2009
    Location
    Central Florida, USA
    Shooter
    Multi Format
    Posts
    4,076
    Seal and few other companies market tissues made for RC. I use one but I only used it with FB paper. The instruction that comes with it specifies what temperature range must be used for each type of paper. I *think* the only difference is, RC types melt at lower temp than FB only counter part.

    I have never seen pre-cut sheets smaller than 8x10. B&H does have on listed for 5x7 but it is discontinued. I'd just buy 8x10 and cut it in half. Probably cheaper that way per sheet as well.
    Develop, stop, fix.... wait.... where's my film?



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin