Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,965   Posts: 1,558,405   Online: 835
      
Results 1 to 5 of 5
  1. #1

    Join Date
    Jan 2004
    Location
    Northern Virginia
    Shooter
    Medium Format
    Posts
    8

    Shooting fine art?

    I've been asked to photograph a fine-art drawing. The drawing is done in pencil includes shading that runs from almost pure black to almost white. Any thoughts and/or recommendations on film speed? I typically shoot Ilford PanF 50 or their 125 speed film. I have occassionally shot their Delta 200 and 400. I plan to shoot this with both medium (6x6) and large (4x5) formats.

    Thanks in advance for your thoughts.

  2. #2

    Join Date
    Jun 2003
    Posts
    1,654
    Images
    5
    Good Morning, Patton,

    For the 4 x 5, try to locate some Kodak Commercial 4127. It develops fast (depending on desired contrast, two-three minutes in HC-110B). It's meant for copying continuous tone subjects (old photos) and does a good job with subtle differences in tonality. The only problem is that, as far as I know, it's no longer available from Kodak; I've purchased some from time to time on E-Bay. Can't help on the 120; wish there were a real B & W copy film available in that size.

    Konical

  3. #3
    RAP
    RAP is offline

    Join Date
    Nov 2002
    Shooter
    4x5 Format
    Posts
    476
    You might want to consider color film, negative or transparency. Negative is probably better. Get a color scale or color key and place it in under the drawing, so that it can be cropped out when the negative is printed. The scale will be used so color accuracy can be maintained.
    Time & tides wait for no one, especially photographers.

  4. #4
    DKT
    DKT is offline

    Join Date
    Sep 2002
    Posts
    504
    Ilford Ortho Plus in 4x5. it's rated as 40 EI tungsten, and 80 for daylight. It's actually a pretty convenient film for studio work in that you can double up with a film like TMX and the speed is pretty much the same. You can use standard developers with it as well, and it can handle wide range of contrasts--you can use paper developers, or high contrast ones (D11, D19 etc) also.

    I use it at work for shooting this sort of thing, and copying photos as well. My normal time for a deeptank (t max rs, repl) is 6 minutes at 75 deg. F. You can run it up to about a one-stop push in TMAX RS and it handles nicely, and you can pull it some as well to control contrast....

    you can also proof it in the studio off type 55 p/n. the positive is the normal exposure for strobe, and you add a half stop for tungsten. I usually shoot a normal and a plus half, but for line art and etchings--sometimes it helps to shoot slightly under and then push a little bit.
    hope this helps.

  5. #5
    Ian Grant's Avatar
    Join Date
    Aug 2004
    Location
    West Midlands, UK, and Turkey
    Shooter
    Multi Format
    Posts
    16,336
    Images
    148
    I'll second using the Ilford Ortho film.

    It's a brilliant film for copying photographs and artwork, and I used to use it extensively, it's easier to get clean highlights compared to using conventional Panchromatic films. It's also extremely versatile when it comes to processing.

    Ian

    Quote Originally Posted by DKT View Post
    Ilford Ortho Plus in 4x5.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin