Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,945   Posts: 1,585,833   Online: 983
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Jul 2012
    Shooter
    Medium Format
    Posts
    828

    Rolleiflex Ever Ready Case..help

    Hey guys,

    ran into a problem with my Rollei case. The rotating catch device (lack of a better term) the little metal leaf doesn't swing out and catch on the camera. I looked at mechinisim and it's riveted together. Has anyone here had this problem? If so...How did you fix it?

    ToddB

  2. #2

    Join Date
    Nov 2005
    Location
    Los Angeles, CA
    Shooter
    Multi Format
    Posts
    5,285
    I think I know what you are describing (I only used the case for storing the camera when not in use). The locking leaf may need to be bent a bit (flattened, I seem to recall).

  3. #3

    Join Date
    Jul 2012
    Shooter
    Medium Format
    Posts
    828

    Update..

    Hey guys,
    I took the plunge and drilled all the rivet out holding that strap capture piece and re-set it an re-revit it back into place. Worked perfectly. So if your case has an issue with this, feel confidant that it can be done.

    ToddB



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin