Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,727   Posts: 1,515,188   Online: 944
      
Results 1 to 8 of 8
  1. #1

    Join Date
    Nov 2004
    Location
    Italia
    Shooter
    Multi Format
    Posts
    4,680

    Dumb questions ETRSI

    1) How do I open the back? I think it's an older back with only one button on the side. It sure doesn't seem to want to open. Hard to load film to test the body this way.

    2) How do I mount the hood? Only way I can get it on is at an angle to what it should be. The normal hood for the 75mm.

    3) The pro hood I got came with a 58mm attachment. Can I just pickup a 62mm attachment for it?

  2. #2

    Join Date
    Nov 2004
    Location
    Italia
    Shooter
    Multi Format
    Posts
    4,680
    Got the back open. Didn't even need a hammer.

  3. #3
    titrisol's Avatar
    Join Date
    Aug 2004
    Location
    Rotterdam
    Shooter
    Multi Format
    Posts
    1,671
    Images
    8
    You can download the manual in the Tamron website.
    It's free
    http://tamron.com/about/manuals.asp
    Mama took my APX away.....

  4. #4
    blaze-on's Avatar
    Join Date
    Nov 2004
    Location
    Riverside, CA
    Shooter
    Multi Format
    Posts
    1,432
    Images
    61
    Try this place for etr stuff
    http://www.gassers.com/

    and Samy's Camera has been clearing out their Bronica stuff and may still have some odds and ends.

    A 62 ring will let you mount the pro-hood to the lenses.

    The regular shade should go on at an angle, then turn to line up the mark with center of lens...I think you have to hold in the small button for this..
    Matt's Photo Site
    "I invent nothing, I rediscover". Auguste Rodin

  5. #5

    Join Date
    Nov 2004
    Location
    Italia
    Shooter
    Multi Format
    Posts
    4,680
    Looks like the hood ends up upside down when it's on! Or at least the writing is upside down.

    I had the manual printed out. But it was printed B&W and the arrows are supposed to be red. End up in the print out being the same shade the back is. So when the manual talks about squeezing in the direction of the arrows I was even more confused-)

  6. #6
    AllanD's Avatar
    Join Date
    Apr 2003
    Location
    Wiltshire,UK
    Shooter
    Medium Format
    Posts
    79
    A Cokin 'P' series adapter ring will work with the pro hood. Its a little thin, but this is easily overcome by gluing a circle of thin black card to the pro hood, to shim it out a little. Of course, the Cokin adapters are very widely available.
    Heat or light; it depends on your sensitivity.

  7. #7

    Join Date
    Nov 2004
    Location
    Italia
    Shooter
    Multi Format
    Posts
    4,680
    Thanks. That'll be much easier to find. Too bad the local sellers want so much. One more thing to mail order.

  8. #8

    Join Date
    Nov 2004
    Location
    Italia
    Shooter
    Multi Format
    Posts
    4,680
    Riddle me this.

    On the mounting ring that came with the shade is written 58mm in big type. In smaller type on the side is written 62mm-58mm. So I figured it was a 58mm ring. Nope it's 62mm!.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin