Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,922   Posts: 1,556,635   Online: 1330
      
Results 1 to 4 of 4
  1. #1
    Anupam Basu's Avatar
    Join Date
    Nov 2005
    Location
    Madison, WI
    Shooter
    Multi Format
    Posts
    504
    Images
    20

    Tripod mount on Kodak Brownie Hawkeye Flash

    Hi,

    I suppose the Brownie Hawkeye qualifies as a medium format camera - so let me ask the question here. Mine seems to have an odd sized tripod socket that's just a tad too small for my tripod head. I just converted it to a pinhole and would love to be able to put it on a tripod.

    So, is there any standard adaptor I could use on this camera, or am I out of luck?

    Thanks for any tips.

    -A

  2. #2
    Donald Qualls's Avatar
    Join Date
    Jan 2005
    Location
    North Carolina, USA (transplanted from Seattle)
    Shooter
    Multi Format
    Posts
    1,845
    What you're seeing as a tripod socket is half of the "pin and screw" flash mount. The Hawkeye has no tripod socket, though it's easy to add one. Get a piece of 1/4" poplar, one inch wide, at the nearest Home Depot. While you're there, get a "blind nut" in 1/4-20 size and a cheap hot glue gun and some glue sticks for it.

    When you get home, cut two pieces of the poplar to size to form a "T" shape on the bottom of the removable back part of the camera body. In the one that will be crosswise, drill a centered 5/16" hole to accept the center shank of the blind nut, and insert the nut into the hole -- if it's the "drive in" type with sharp spurs, put the wood on a flat board or similar and drive the nut home with a hammer; otherwise, leave it loose; we'll lock it in place on the next step.

    Now, heat up the hot glue gun and use it to attach the two sticks to the bottom of the camera -- there'll be a little clearance under the front one where the plate of the blind nut contacts, so install that one first; hold it in place and squeeze hot glue under the edge. Once it's in place and the glue is set up, do the same with the lengthwise stick, leaving the same spacing under the stick when you glue it in place. Last thing before putting the glue gun away, put a small dollop of hot glue on the bottom of each stick at the ends of the "T"; these will act as feet and let you steady the camera without a tripod (for a low point of view, etc.). Let these partially harden, then press them against a flat, smooth surface to give them even, flat bottoms (but don't leave them in contact for long until completely hard).

    Ready to go! Oh, BTW -- after using it a bit, you'll probably wish for a cable release socket -- good luck! One potential trick; use a small block of wood and very strong rubber band to hold the shutter release down, so you can take your hands off the camera for long exposures. A small plastic clamp might also work.
    Photography has always fascinated me -- as a child, simply for the magic of capturing an image onto glossy paper with a little box, but as an adult because of the unique juxtaposition of science and art -- the physics of optics, the mechanics of the camera, the chemistry of film and developer, alongside the art in seeing, composing, exposing, processing and printing.

  3. #3
    Anupam Basu's Avatar
    Join Date
    Nov 2005
    Location
    Madison, WI
    Shooter
    Multi Format
    Posts
    504
    Images
    20
    Quote Originally Posted by Donald Qualls
    Oh, BTW -- after using it a bit, you'll probably wish for a cable release socket
    I already solved that one with a toothpick.

    Many thanks for the tripod socket tip, I'll try it tomorrow. I converted it to a pinhole - it was quite easy to do too - the thing came apart quite easily - I didn't even need to break the lens. The tripod socket, and I'll have my dream 6x6 pinhole camera.

    -A

  4. #4
    Donald Qualls's Avatar
    Join Date
    Jan 2005
    Location
    North Carolina, USA (transplanted from Seattle)
    Shooter
    Multi Format
    Posts
    1,845
    My tripod socket design is tested, BTW -- I have one exactly like this on my Spartus Full-Vue (pinhole converted). That camera uses a rubber band looped around the bottom of the body to a bolt in the flash mount to hold the shutter (a lever instead of a button) open in B mode.
    Photography has always fascinated me -- as a child, simply for the magic of capturing an image onto glossy paper with a little box, but as an adult because of the unique juxtaposition of science and art -- the physics of optics, the mechanics of the camera, the chemistry of film and developer, alongside the art in seeing, composing, exposing, processing and printing.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin