Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 75,277   Posts: 1,660,936   Online: 737
      
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    jcc
    jcc is offline
    jcc's Avatar
    Join Date
    Jul 2012
    Location
    Norman, Oklahoma
    Shooter
    Multi Format
    Posts
    495
    Quote Originally Posted by alex gard View Post
    Have an issue. I was hurredly taking some snaps of a setting sun, I started removing the lens and fired the shutter by accident. Now the lens is stuck. very stuck. it's turned about 1/2 inch. The body is now cocked and will not fire (the flaps are open, mirror is up, though however winder is wound too. I've tried the screwdriver trick, the little screw winds the quarter turn, then won't turn any more (it locks) then I try and remove the lens and the screw just clicks back to original position. I've exhausted trying as I've started wearing the screw down. Such a bad time for this camera to jam up!
    Sounds like the timing got knocked out of sync. I second the notion that it needs to go see a camera doctor.

  2. #12
    alex gard's Avatar
    Join Date
    Nov 2013
    Location
    Tasmania
    Shooter
    Multi Format
    Posts
    82
    Images
    25
    the lens is now off the body, I gave it another try this morning, I held the lens release button and 'locked the lens' back into position, held the screwdriver in the screw and gently but sternly then removed the lens. the camera body is fine and accepts lenses and seems to fire normally now with other lens but the 80mm now seems to be jammed in the 'fired' position. I haven't tried to do anything to the lens because I seem to remember reading somewhere that lenses were an entirely different ballpark and were complicated to fix or something? The slot that the turning key goes into is jammed slightly counter-clockwise of the cocked position.

  3. #13
    Douglas Fairbank's Avatar
    Join Date
    Dec 2012
    Location
    Bushey, UK
    Shooter
    Medium Format
    Posts
    66
    The key has been turned anti clockwise and the latch has engaged. Try and push the latch out towards the edge of the lens and the key should become unjammed so that you may then re-cock it. Dont force anything or it could break and some parts are no longer available.

    Douglas Fairbank
    www.classicv.co.uk

  4. #14

    Join Date
    Jan 2005
    Location
    south central Missouri
    Shooter
    Multi Format
    Posts
    1,934
    Images
    9
    Quote Originally Posted by bdial View Post
    Here's some information that may help. http://www.david-odess.com/faq.html#q18
    David Odess is a Hasselblad repair specialist.

    David may be THE Hasselblad repair specialist.

  5. #15

    Join Date
    Jun 2003
    Location
    Portland, Oregon
    Posts
    1,354
    +1
    I heartily recommend David Odess for Hasselblad repair.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin