Measure the lenses!
C lenses use Bay 50 filters.
My lenses are CF[50mm,80mm, 150mm and 250mm] and all of them use a Bay 60 filter. And will take a 67mm filter with an adapter.
some later versions use a Bay 70 filter.
You can buy used Hasselblad filters in excellent condition at KEH.com, Samys, and Bel-Air Camera.
Warning!! Handling a Hasselblad can be harmful to your financial well being!
Nothing beats a great piece of glass!
I leave the digital work for the urologists and proctologists.
Quite the contrary.
Originally Posted by BrianShaw
The designations used by Hasselblad are nominal, not real values.
Use a ruler on a bayonet 60 lens, and you would start believing that it would rather need a bayonet 70 filter than a bayonet 60 filter.
So to avoid even greater confusion, avoid using a ruler.
I stand corrected. Thank you QG. Hasselblad rounds down: 57 = 50; 67 = 60.
Last edited by BrianShaw; 04-19-2008 at 10:40 AM. Click to view previous post history.
Would you all recommend the method above (step rings and screw filters) of applying filters vs the bellows mounted holder (not sure of the actual term for it...I was given a 1972 500CM with the 80mm f/2.8 and this bellows, filter holder-thingy)?
The 50 Distagon C used Series 8. While *SOME* 67mm filters will screw in, the thread pitch is different and it is not reccomended to use 67mm size filters in place of Series 8. I have seen 67mm filters jammed on a Series 8 ring that would not budge. Series 8 is 66.7mm size.
Sponsored Ad. (Subscribers to APUG have the option to remove this ad.)