Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,564   Posts: 1,545,310   Online: 869
      
Results 1 to 2 of 2
  1. #1
    gr82bart's Avatar
    Join Date
    Mar 2003
    Location
    Culver City, CA
    Shooter
    Multi Format
    Posts
    5,224
    Images
    37
    Anyone know what all the buttons do? Sounds silly I know, but I got this off of KEH and it was a steal - problem is no manual! Does it only read in EVs?

    Art.
    Visit my website at www.ArtLiem.com
    or my online portfolios at APUG and ModelMayhem

  2. #2
    Fintan's Avatar
    Join Date
    Jan 2004
    Location
    Ireland
    Shooter
    Multi Format
    Posts
    1,793
    Images
    2
    ISO button changes the ISO by using the two arrow up and down PR buttons.
    F-Max is the maximum aperture you got on the lens you are using
    Metering button toggles from Spot [little dot], Integral [square] and Incident light metering [sun with rays]

    The red button switches it on.

    The most important thing is to make sure your focusing screen matches your finder. The recommended screen for the current PME45s is the Acute Matte D Series screen, but if you use an older screen you can set the finder to compensate. You need to enter programming mode to do this, by pressing the two PR buttons simultaneously.

    You could pick up a manual easily, go get one!



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin