Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,695   Posts: 1,549,044   Online: 1010
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Feb 2007
    Location
    mass usa
    Shooter
    Medium Format
    Posts
    7

    Question about MLU on Bronica ETRSi with AE-iii prism

    I just received my ETRSi with an AE-III prism.
    I mounted it on my tripod and focused on my subject in A mode, then pressed the M button to lock exposure. Flipped up the MLU switch and fired away.
    My question is, should the MLU switch back off on it's own, or do I have to do it manually, which I did. I've gone over the manual several times and it doesn't say what should happen after I fire.
    I'm not finished with my first roll of film yet, so I would appreciate any input before I go any further.
    It's the 40th Anniversary edition if it makes a difference.

    Thanks

  2. #2

    Join Date
    Sep 2009
    Shooter
    Medium Format
    Posts
    23
    Hi
    The MLU will stay on unless you flip it back after the picture is taken.Peter

  3. #3
    lxdude's Avatar
    Join Date
    Apr 2009
    Location
    Redlands, So. Calif.
    Shooter
    Multi Format
    Posts
    6,662
    And flip it it back after the shot but before winding to the next frame, or it will expose that frame when you flip it back.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin