Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,711   Posts: 1,548,643   Online: 1102
      
Results 1 to 3 of 3
  1. #1

    Join Date
    May 2011
    Shooter
    35mm
    Posts
    8

    Bronica ETRSi and Film Speed

    I feel stupid asking this, but how do you set film speed in the camera.
    I have a WLF and I am using a Gossen Digisix to get light reading.

  2. #2
    Gerry M's Avatar
    Join Date
    Nov 2005
    Location
    Oregon
    Shooter
    Multi Format
    Posts
    770
    Images
    135
    If I understand your question, with a wlf, you don't need to set film speed. You do that on the hand held meter. Transfer the meter readings (aperture and shutter speed) to the camera. If using an AE metered prism, you set the film speed on the prism. Hope this helps some.
    Gerry

  3. #3

    Join Date
    May 2011
    Shooter
    35mm
    Posts
    8
    It confirms my thoughts. I was thinking you only need to tell the camera the film speed so it can accurately adjust the light meter. I set my light meter at 100asa which is what I am running and then set the aperture and shutter speed accordingly.
    Thanks for the reply.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin