Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,963   Posts: 1,558,378   Online: 775
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Newt_on_Swings's Avatar
    Join Date
    Mar 2011
    Location
    NYC
    Shooter
    Multi Format
    Posts
    1,962
    Good to hear, many times they jam if advancing too hard/roughly but its a very easy DIY fix. Its also good to see if the area under the bottom plate is clean. Some cameras with lost motor drive covers can get dirty/linty. Keep in mind also to check if it is over lubed if its been opened by someone else in the past. Too much grease is a bad thing.

  2. #12

    Join Date
    Oct 2011
    Shooter
    Medium Format
    Posts
    281
    It's my guess that these bodies have been used with the older MD11 motordrive, which had no automatic power cut off, like the later MD12 had. Thus connecting/disconnecting the MD11, could upset the shutter mechanism, causing the odd jam.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin