Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,727   Posts: 1,515,194   Online: 1005
      
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    thundertwin72's Avatar
    Join Date
    Sep 2012
    Location
    Barcelona, SPAIN
    Shooter
    Multi Format
    Posts
    21
    You are looking for this: Camera Seal Kits - Olympus OM10.
    This website is the same person who sold the kits on eBay: Jon Godman.

    Regards.

  2. #12

    Join Date
    Sep 2004
    Location
    New Jersey (again)
    Shooter
    35mm RF
    Posts
    1,952
    The first thing to check with any Japanese camera from the 1990s and earlier is the foam. Open the back and run the tip of your little finger along the edges of the back. If it comes away with a black line, the foam has to be replaced.

    It takes about 20 minutes to remove and replace the foam. Lighter fluid will ensure that you remove as much of the old foam as possible.

    And like others have mentioned, be sure to replace the mirror bumper in the mirror box.

    Try to avoid letting any of the old foam fall into the shutter assembly.

  3. #13
    Rom
    Rom is offline
    Rom's Avatar
    Join Date
    Sep 2010
    Location
    Lyon - France
    Shooter
    Multi Format
    Posts
    132
    Images
    2
    Thanks all for helping me.
    All the best,
    Rom
    ___________________
    Blog | G+ | My DeviantArt

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin