Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,856   Posts: 1,582,986   Online: 1063
      
Results 1 to 10 of 10
  1. #1

    Join Date
    Jul 2012
    Location
    Derby, United Kingdom
    Shooter
    Multi Format
    Posts
    51

    Any experience of an Altix-n?

    Does anyone have an Altix-n? I've just been given one and I can work out almost everything except how to reset the frame counter. Any tips anyone?

  2. #2
    AgX
    AgX is offline

    Join Date
    Apr 2007
    Location
    Germany
    Shooter
    Multi Format
    Posts
    9,051
    After inserting film into the take-up spool and two swings of the cocking lever, with preceeding setting ther shutter, turn the frame counter dial anti-clockwise until the last mark before #36 lines up with the body mark. The counter will then count down showing the number of frames left to be exposed.

  3. #3

    Join Date
    Jul 2012
    Location
    Derby, United Kingdom
    Shooter
    Multi Format
    Posts
    51
    Thanks AgX. When I use the winder, there's a metal lever that moves round the shutter speed ring. Do I use this to set the shutter before winding the film to the first frame?

    Frohliche Weinachten.
    Chris B.

  4. #4
    AgX
    AgX is offline

    Join Date
    Apr 2007
    Location
    Germany
    Shooter
    Multi Format
    Posts
    9,051
    The exposure time can be set with cocked or uncocked shutter.
    The lever you refer to may be the knob on top of the lens near the body. Moving this further to the left after cocking will install the self-timer, which is realeased by pressing the release button.

  5. #5

    Join Date
    Jul 2012
    Location
    Derby, United Kingdom
    Shooter
    Multi Format
    Posts
    51
    I've loades the Altix-n and between showers, I went out with this afternoon. When the roll is finished, how do I release the film to rewind it?

  6. #6
    AgX
    AgX is offline

    Join Date
    Apr 2007
    Location
    Germany
    Shooter
    Multi Format
    Posts
    9,051
    Well..., as most 35mm cameras the Altix has a button at the underside to disengage the transport mechanism, thus allowing the film to be re-spooled by means of the re-wind knob.

  7. #7

    Join Date
    Jul 2012
    Location
    Derby, United Kingdom
    Shooter
    Multi Format
    Posts
    51
    That's the one next to the screw that holds the back on right? I wondered if that might be it. I'll remember not to play with it whilst there's film in the camera ;-)

  8. #8

    Join Date
    Jul 2012
    Location
    Derby, United Kingdom
    Shooter
    Multi Format
    Posts
    51
    So are you a bit of an Altix enthusiast then AgX?

  9. #9
    AgX
    AgX is offline

    Join Date
    Apr 2007
    Location
    Germany
    Shooter
    Multi Format
    Posts
    9,051
    Not at all, but it's not a that complicated camera.

  10. #10

    Join Date
    Jul 2012
    Location
    Derby, United Kingdom
    Shooter
    Multi Format
    Posts
    51
    It says on camerapedia that it's a sophisticated camera and I can agree that it is. No, it's not that complicated, but as an older camera, it's less standarised and less automatic than newer ones. But when you find where all the controls are and how to use them, it is a very elegantly designed camera.

    Anyway, thanks for your help.
    Chris B.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin