Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,933   Posts: 1,585,546   Online: 852
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Jun 2013
    Shooter
    35mm
    Posts
    43
    Images
    5

    Nikon F2 "Data" modifications

    What modifications did Nikon do on the F2 Data?

    Can an ordinary F2 be made to work with the MF-10 data back?

  2. #2

    Join Date
    Dec 2010
    Shooter
    35mm
    Posts
    131
    I'm quite certain only three changes to the body : 1) a special focus screen that outlined the data-imprint area, 2) a small mask in the film gate that prevented a corresponding section of film from being exposed to the 'taking' image and 3) the word 'Data' engraved next to the serial number on the top plate. Any standard F2 body/finder combination could be used with the MF-10/MF-11.

    Sover Wong's website states 5,000 F2 Data units were produced, meaning one unit = F2 body with data back. (Sellers, so they can falsely justify a higher price, often say only 1,000 units were produced...or 500, or 100, or 10!) Sover doesn't state specifically how many of the 5,000 units had the MF-10 (standard 36 exp data back) vs. the MF-11 (250 exposure data back). Data bodies are often separated from their MF-10/MF11 Data backs. The Data bodies without the proper backs aren't worth much more than average F2 bodies. But the proper body and back set is rare for sure, especially if all components of the MF-10/11 are included. But not nearly as rare as the F2H (Highspeed), of which there were a whopping 500 units. Unlike the Data, the Highspeed has proprietary everything: titanium body, titanium motordrive, battery pack and battery charger. That's a bit more info than requested but intersting to note.

  3. #3

    Join Date
    Jun 2013
    Shooter
    35mm
    Posts
    43
    Images
    5
    [QUOTE=Aja B;1572907]I'm quite certain only three changes to the body : 1) a special focus screen that outlined the data-imprint area, 2) a small mask in the film gate that prevented a corresponding section of film from being exposed to the 'taking' image and 3) the word 'Data' engraved next to the serial number on the top plate. Any standard F2 body/finder combination could be used with the MF-10/MF-11.


    Many thanks!

    I suspected that the changes were minor, thank you for all the information... very helpful.

    One more question, how does the MF-10 built-in flash get triggered? Is it done by connecting it's flash terminal to ???

  4. #4

    Join Date
    Dec 2010
    Shooter
    35mm
    Posts
    131
    Quote Originally Posted by DrZorba View Post
    One more question, how does the MF-10 built-in flash get triggered? Is it done by connecting it's flash terminal to ???
    A short PC sync chord w/ dual male connectors is needed. One end is plugged into the sync terminal on the front of the F2 body and the other end goes into the MF-10.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin