Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,856   Posts: 1,582,960   Online: 965
      
Page 4 of 4 FirstFirst 1234
Results 31 to 33 of 33
  1. #31
    Rol_Lei Nut's Avatar
    Join Date
    Jul 2006
    Location
    Hamburg
    Shooter
    Multi Format
    Posts
    1,118
    De Kamera
    Hans Klinkhamer
    Batavenstraat 47
    7041 VA 's-Heerenberg
    telefoon: 0314-668755
    info@dekamera.com

    Not only did he repair the obvious at a very good price, the camera came back with a cleaned viewfinder, an adjusted film magazine and he had tested the individual accumulators (not packs) I had sent and found some defective ones (now I have my own tester) - basically a complete & thorough CLA.
    While I hope I'll never need his services again, if I do, I'll certainly contact him first...

    I got a batch of 20 Sanyo 700s after the repair: they really seem to make the camera happy...
    ;-)


    Other possibly useful addresses here:
    http://www.sl66.com/pg/repair.shtml

    F&H informed me they no longer repair the SL2000F/3003 themselves and referred me to Paepke (the expensive bid).
    M6, SL, SL2, R5, P6x7, SL3003, SL35-E, F, F2, FM, FE-2, Varex IIa

  2. #32
    ki_
    ki_ is offline

    Join Date
    May 2010
    Shooter
    35mm RF
    Posts
    2
    Quote Originally Posted by Hamster View Post
    Apparently back in the 80's there was a crazy in converting Spotmatics to Rollei mount.
    Do you have any information how this is to be done? Or where I could find a manual to do it?

  3. #33
    Rol_Lei Nut's Avatar
    Join Date
    Jul 2006
    Location
    Hamburg
    Shooter
    Multi Format
    Posts
    1,118
    Quote Originally Posted by ki_ View Post
    Do you have any information how this is to be done? Or where I could find a manual to do it?
    Sadly not, but since the auto diafragm mechanism is practicaly identical (the M42 adapter for Rollei QBM works perfectly), it should just be a matter of properly machining the Spotmatic body to somehow accept a Rollei mount flange.
    M6, SL, SL2, R5, P6x7, SL3003, SL35-E, F, F2, FM, FE-2, Varex IIa

Page 4 of 4 FirstFirst 1234


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin