Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,002   Posts: 1,524,459   Online: 1047
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Jul 2003
    Location
    UK
    Posts
    12
    Hi,

    Just got a p160 cokin linear polarizer for my camera. This might seem a dumb question but how do i put it in to my cokin holder ? It doesnt fit between the slots like the other filters as its about 2mm too big (big enough so that you wouldnt want to force it). THeres no threads so it doesnt screw on, so what the HELL do i do with it ?????

    Olly

  2. #2
    glbeas's Avatar
    Join Date
    Sep 2002
    Location
    Roswell, Ga. USA
    Shooter
    Multi Format
    Posts
    3,307
    Images
    109
    Look at the holder from the top. You will see the rearmost slot is bigger. Thats where the polariser goes.
    Gary Beasley

  3. #3
    Aggie's Avatar
    Join Date
    Jan 2003
    Location
    So. Utah
    Shooter
    Multi Format
    Posts
    4,925
    Images
    6
    ..

  4. #4
    glbeas's Avatar
    Join Date
    Sep 2002
    Location
    Roswell, Ga. USA
    Shooter
    Multi Format
    Posts
    3,307
    Images
    109
    Yeah, he's describing the P series. The A series is so much smaller theres no way to mistake one for the other. The round filters for the Series are all a bit bigger than the standard slots, when the filter is slid into the rear slot it pops into a detent in the middle that it can rotate fairly freely in. It keep you from having to worry about the filter falling out or rotating on its own.
    Gary Beasley



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin