Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 73,625   Posts: 1,622,908   Online: 1121
      
Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25
  1. #21
    clayne's Avatar
    Join Date
    Sep 2008
    Location
    San Francisco, CA | Kuching, MY | Jakarta, ID
    Shooter
    Multi Format
    Posts
    2,837
    Images
    57
    Quote Originally Posted by FilmOnly View Post
    I agree, Ian: the attempt to blame it on a dirty lens only shows their incompetence.
    How's the inside of the camera back look on the camera you used to shoot said film? It's totally possible this happened in processing of course but shit happens.

    If it's a black and white print you can always knife it and spot it. Probably not fiber tho.
    Stop worrying about grain, resolution, sharpness, and everything else that doesn't have a damn thing to do with substance.

    http://www.flickr.com/kediwah

  2. #22

    Join Date
    Jul 2008
    Location
    Southeastern U.S.
    Shooter
    35mm
    Posts
    550
    I usually look at the shutter curtain, etc., after taking a roll out, and, with regard to said camera, I do not remember seeing anything amiss. I had said camera cleaned and checked before I began using it.

  3. #23

    Join Date
    Feb 2005
    Location
    Richmond, VA
    Shooter
    Multi Format
    Posts
    1,066
    The best lab I know of is the one in your house.
    I know how hard it is to get everything going (I've done it every time I moved for the last 30 years), but it's worth it if you can.

  4. #24
    Steve Smith's Avatar
    Join Date
    May 2006
    Location
    Ryde, Isle of Wight
    Shooter
    Medium Format
    Posts
    8,820
    Images
    122
    Quote Originally Posted by George Collier View Post
    The best lab I know of is the one in your house.
    Possibly not the one specifically in my house!! But a good point.

    If you do your own processing you have complete control. The only thing missing is someone to blame when it goes wrong!


    Steve.
    "People who say things won't work are a dime a dozen. People who figure out how to make things work are worth a fortune" - Dave Rat.

  5. #25

    Join Date
    Apr 2004
    Location
    Montgomery, Il/USA
    Shooter
    Multi Format
    Posts
    5,530
    Could be some dust in the camera, just floating around not having much to do except piss you off.
    Try a soft brush for the inside, under the mirror too. Then a blower.
    Some might say I have a bad attitude! Too bad.

Page 3 of 3 FirstFirst 123


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin