|
|
|
-
To get image like posted, you need to
A-use a tripod, yours are showing signs of camera moment.
B-just buy a lazer cut pinhole from Earl at (http://www.f295.org/Pinholeforum/for...?m-1283887930/)
C- 120 film or larger
-
Thumb it may also be that the film is not flat enough like curling and sagging my thoughts for what they are worth.
Is the pinhole size the optimum for this format?
-
the shots in the gallery you posted look to me as if they were shot with medium format -- 120 film. For yur homemade camera, don't be afraid to experiment -- make another pinhole -- for small format it is more important to have a very small hole and a very round one, so experiment with perhaps drilling one in aluminum from a soda can and filing the edges so it is smooth. Use a needle for a drill and be patient.
It is also very difficult to have too much black tape on a homemade camera, and make sure you paint the inside matt black so there are no reflections. It will take a bit of experimentation, but you'll improve.
|
|
Adv Reply
