Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,870   Posts: 1,583,307   Online: 1122

Square Peg Adapter for Bolex H8 100ft rolls

  1. Daniel Haskins
    The 100ft rolls of 8mm film available today are on the square hole 16mm reels. I was wondering if anyone knew where to get the adapter to make them fit the bolex correctly.
  2. bolextech
    bolextech
    Two options:

    1) When JK Camera would convert these cameras to DS8, he would add a sleeve to the take-up spindles to take the square holes. Maybe, he still has some in stock.

    2) Have the spindles permanently replaced with square ones from the H16. This requires complete camera dis-assembly. Contact me for details.

    Cheers,
    Jean-Louis
  3. ic-racer
    ic-racer
    I got spindle adapters for all my cameras from Chambless.
  4. Daniel Haskins
    Daniel Haskins
    Chambless doesn't have any. I'll have to email JK Camera, see if he has any left over.
Results 1 to 4 of 4


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin