Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,206   Posts: 1,531,821   Online: 882

OM-2N Rewnd crank

  1. Leeston
    Hi

    I have three OM-2N's and one is missing the tiny rewind crank silver retaining pin, thus I am unable to rewind properly, my query is, will the om-10 rewind knob fit a OM-2N as my thinking is that I could pick one up cheaply and simply transfer it.

    Thank you in advance for your time

    Lee
  2. wblynch
    wblynch
    No

    But you might be able to make a pin by cutting off a tiny nail/brad.
  3. Leeston
    Leeston
    Thanks Brad, yes I had a similar idea and was about to try when lo and behold I found the missing pin on my carpet this morning, have reassembled and all is now fine.

    A happy ending.
  4. darinwc
    darinwc
    let me know if you need a part i have a om10 and a om2 in parts.
Results 1 to 4 of 4


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin