Here's a bit of reference on strobes, http://www.paulcbuff.com/sfe.php
There are very nice continuous light setups now that use flouresants and don't have the heat or color temperature issues.
The big difference between the two is that strobes will generally freeze the action and that the continuous light sets allow you to see what you get before you shoot.
With regard to a Polaroid or other testing tool, these can be beneficial for learning or designing a setup and in checking for errors. This is not required though if you have a flash meter, something like a Sekonik L-358.
Using a flash meter you can can ask the question what should the light be doing here in relation to my subject? Darker, lighter... Takes a bit more thought but it's not to tough.
Many modern strobes are set up with a sensor that "sees" the flash from other lights and that can trigger the pop. It is reliable as long as it can "see" the other lights pop but that fully depends on the orientation of the lights and isn't always workable. A trigger on or wire to each light is the most reliable.
Digital is NOT a good polaroid substitute! I have yet to see a digital camera whose ISO 100 is the same as a handheld flash meter's ISO 100. If you are ultimately making film exposures, then just learn your light meter and learn lighting ratios, which are easy enough. You can use the digital to proof the lighting ratios, but do not use it as a substitute meter!
Originally Posted by hoffy
I highly recommend the White Lightning/Paul C. Buff setups that Mark mentioned. There is not a better price to value available anywhere in strobe lighting.
We run a portrait studio, and I have five of the older Ultra 800 units which provide plenty of light for my work. Most of the time I use them dialed down to minus 3f. The larger units are quite powerful, but for portraits, you probably won't need it. I can dial the 800s all the way up and pull f16 from a silver bounce umbrella at about 8 feet, which is plenty for white knockout backgrounds.
These units were purchased used, and I have been wearing them out for years. They perform without fail. The only time a tube has blown has been when I broke it, and only once have I had to send in a unit for work. They covered the work under the original warranty even though I was not the original owner, and I had it back inside a week.
One of my clients just set up a studio in their warehouse for product photography, so we bought four new X800s for them. Plenty of power for all applications.
One head, a big white foam core reflector and a decent soft box is all you need to start. If you like a kicker light look you can add a silver reflector at 45 degrees behind the subject to bounce the main. (I do some pretty complex lighting but I still love pure simplicity in portraits.)
If you grab a Cyber Sync receiver and transmitter, you'll be all set: the transmitter has a miniphone plug that you can use to connect to the PC on your RB. Any other units can sync through the slaves.
Paul C. Buff: love them long time.
It's easy enough to figure out that ASA125 on your meter is ASA100 on your camera, and the digital makes a great Polaroid. In fact, digital hits its peak in the studio under controlled lighting and contrast, just as film does.
Originally Posted by TheFlyingCamera
I routinely make flawless 20-30" prints from a Canon 5D. I couldn't make a living shooting studio portraits on film. :blink:
I've tripped over calbles myself---I use the optical slave on the strobes and, what I do in place of any "radio trigger"--I use the first "radio slave"--the optical slave...
get a teeny tiny flash--like a AAA powered morris micro slave--they take one AAA battery--attach this to the camera with tape or whatever--connect synch to that---fire--it fires the teeny flash which triggers the big strobes
I've never used powerpacks but use calumet (bowens) travelights for over 10 years...without having a want to use anything else--they seemto answer the call no matter what I want to do.
Couldn't disagree more. Concur with Parker Smith. Usually use a DSLR and a Sekonic 558 for studio shoots. Maybe your film and processing are free. Mine aren't.
Originally Posted by TheFlyingCamera
Continuous lighting doesn't necessarily have to be hot, the newer CFL systems are loads cooler and are color corrected for color films. Check out this source:
I have a small set of continuous w/umbrellas for portrait and still life work.
I haven't read all the responses, so others may have said this, (I must off to work) but as a commercial/industrial photographer for most of my life, and I taught Color Studio at the Germain School of Photography for many years, hands down you want studio strobe when photographing people. I had comet strobes and found them to be great. Wireless remote is a good idea, and if you buy an older used system, you must have wireless remote for many cameras, as the camera's circuitry can be harmed by the voltage of the older system. I guess there's a feedback of some kind. I have an old used Speedatron now, and when shooting digital, or when students want to plug in cameras with electronics, like some of the later Cannon film cameras, I rent a remote. Also, for some cheaper cameras without a flash connection post, (PC, etc.) the remotes are hot shoe compatible. And speaking of renting, you may want to rent once or twice to see how it all works for you.
Originally Posted by WriterOfLight
Best, Doug Schwab
First, welcome to APUG, from across the Georgia Strait.
I'm going to make a slightly radical suggestion. Keep your eyes open for some studio strobes (monolights) that are cheap (really cheap) and used. They won't satisfy any long term needs, but if you have plans to experiment and familiarize yourself first, $200 spent on Craigslist might teach you a whole bunch about what you really need.
If you then decide to buy a new setup, make sure you get something mainstream. The cheaper knockoffs are generally poor value.
I'm happy with a single cord to one light, with the others triggered by optical slaves. Optical slaves don't work well, however, on location if there are others present taking photos (think weddings).
Ebay has thousands of cheap radio triggers. Most people I've talked to have been reasonably happy with the results they have obtained from them. They are, however, a bit less dependable than something like a Pocket Wizard, and don't offer the wiz-bang extra features for interface with and control from the latest model digital cameras that the top of the line Pocket Wizards have.
If you buy older, used flashes, they may have a high trigger voltage. That can damage newer electronic cameras (both digital and film) and radio triggers not designed for high voltages. I have a set of very old Bowens monolights that have very high trigger voltages - I won't connect them to anything other than mechanical cameras, or older optical slaves. A Wein "Safe-Synch" would be another option.
A 6x4.5 back for your Mamiya RB67 would give you a 50% increase in the number of test shots per roll when you are learning to use your lights.
A good flash meter is a must, and the ability to trigger the flash from the meter (by cord or otherwise) is a valuable feature.
The modeling lights in strobes definitely vary in quality. Placement relative to the position of the flash tubes is critical when using direct flash.
A separate digital camera can be an okay substitute for a Polaroid. A digital back would be better (same camera position and lens) but the cost is, of course, unrealistic.
A separate digital camera is less accurate as a replacement for a flash meter.
If you can swing it, a visit to either Beau Photo in Vancouver (good knowledge and some rental selection) or Glazer's in Seattle (great knowledge and rental and sales display selection) could really help you in your choices. There are also a couple of places in Vancouver that rent equipped studios.
Hope this helps.
The point of ASA is that it's a STANDARD. If on my Canon 5D it is actually ASA 125, but on my friend's Nikon D3x it's ASA 80, it's not a standard anymore. It's not that you can't figure out what it is and compensate, but you shouldn't have to. I like to set my power settings so that I'm using the same f-stop with my test exposure as I am my final exposure, so that I know what I see in my proof is the same as what I will see in my final print. If you're shooting a 35mm or APS-C sensor, AND your digital camera's ASA 100 is not the same as your film's ASA 100, then what you see on the LCD on the back of the digital camera will NOT be indicative of what you will get on a 6x7cm negative in your RB-67. You have to make enough changes between the two systems that it defeats the purpose.
Originally Posted by ParkerSmithPhoto