Yes, it was a bit more than just a regular CLA. Plenty of "digging" and some shutter stuff that I hadn't noticed. I appreciated their throughness and attention to detail. This is a camera that I wish to continue to use for many years to come. I compare it to a tune up on a BMW or Lexus; expect a large bill even if you say "there are no problems"
I love the SWC and have used three different bodies since the mid seventies.
PS: Hasselblad is made in Sweden.
Polishing a lens is NUTS... Those things are refined to nano-meter. Polishing is at the nano meter level.
An eye-glass lab won't even polish eyeglass lenses because of perscription changes.
Just keep using it. I haven't even bothered with filters on my Hassy lenses (protection). They are tough.
I use Steve in Livonia Mich for my tune-ups.. Used to use Grabowski... but I think he is retired and Ghil is nearly done too.
As for the micro scratches - have a look at www.focalpointlens.com.
Well, I got my SWC back and apparently it didn't have any problems with microscratching. I had a few other things done to the camera but the CLA was around $250. I'm very happy with the service I got and Bob Gallagher was very pleasant to deal with. Unfortunately part of the plastic housing on the film crank is cracked and the last batch of cranks from Hasselblad were not manufactured within tolerance and do not fit. If anyone has an extra film crank in good condition I would be interested in buying it - please PM me.