Plaubel Makiflex Standard.
Thought I would show you guys my Plaubel Makiflex Standard, with 150mm F2.8 Schneider Xenotar, which I mounted on a Peco Jr recessed board. Also shown is the Plaubel Peco Jr Compendium Hood, and the 9x9 Plaubel Makiflex back, which puts a 9x9cm image onto 4x5" film. I'm using it with 4x5" spring-loaded Linhof holders.
Anybody else here interested in the Makiflex or the Pecoflex?
Here's my new Auto Makiflex.
Auto-Aperture, like a European Auto Graflex. Shown with my new 360mm Schneider Tele-Xenar, mounted to an old Sinar Norma lenscone, and bolted to a flat Plaubel lensboard. Very nice to look through. :cool:
Anybody know what holders this Back takes?
A Graphic 4x5" film holder is too large. Plaubel listed the following in their catalog:
#97324 31/4x31/4 back for Single Slides 4x5" MX1/537
#97486 4x5" Univesal Holder for plates & sheetfilm SG1/377 (use with MX1/537)
Actual measured dimensions would be approximately 101mmx140mmx7mm for the single shot holder. Or maybe this back takes 9x12 sheetfilm?
Here are some photos. Can anybody tell me where I can find some holders for this back, so that I can use it? Thanks!