Possible defects in Adox films
I think it's time for Adox to address the growing number of APUG posts that are reporting possible issues with the emulsions of Adox 25 and 50 ASA films. Apparently more and more members are describing pin holes in negatives made with Adox films. Some of us are eschewing the use of Adox films until the issue of such pinholes is addressed, and corrected. Can Adox make some comment now as to a possible cause ( or causes ) for such pinholes? Are members making some errors in the darkroom with processing, or are there indentifiable problems with certain emulsions from certain "batches"? If there are problems with darkroom techniques, then Adox should consider providing more definitive guidance as to techniques that should be avoided (e.g.various chemical formulations, certain developers, etc., etc. ). If the problem is in certain emulsions, then such emulsions should be replaced. There is no shame in finding that certain batches are defective, and taking steps to repair the manufacturing errors that have led to such defects. All on APUG would applaud the diligence and honesty of such an approach. If the fault is not in the manufacturing, then please consider providing some help to those here who are having problems using Adox films. Thanks for helping.