Originally Posted by 5stringdeath
I noticed that also & I think 126 this would give some life to many old point & shoots. Might even breath some new life into the Lumo scene ?
My Kodak X25 & Pentax 110 auto will be ready when you get it out.
My mistake no mention of 126, guess wishful thinking ?
Originally Posted by michaelbsc
the first coating is calculated so narowly that it does not make sense for dealers to carry it. You are welcome to order it directly from Fotoimpex.
We are also in the process of setting up the multilingual webshop.
Actually most things are translated for months now it was just a technical issue. We will change to a new webshop system shortly.
If you have any problems just shoot us an email or call us.
We speak english.
Well...I never had a chance to try the AGFA films but I am very, very, excited about this. I am quite a fan of ADOX! I would absolutly love to see a 110 and 126 film also! My 110 and 126 cameras are quite hungry! Thanks a million for this. I have heard such great things about the apx films and have wanted to try them.
At the end of Agfa, the "New" APX400 was listed as requiring an extended time in development - which (mysteriously) was the same, or VERY close to, what it would be with APX100 pushed two stops to ISO400.
Originally Posted by df cardwell
After considering that, I have been suspicious ...
Even at that, I have used the "new" APX400 processed as recommended and have noticed very little difference from the "old" film.
As we near the end of August, any word on when the sheet film version of this film will be available? (4x5 and 5x7) Will Freestyle carry it?
The latest datasheet for Rodinal lists APX at 20 Minutes 1+50.
If someone lists a development time in Rodinal not mentioning the dilution I assume itīs ment for 1+25.
To me 1+25 is the "standard". So this is why we had this misunderstanding.
The new film will have a higher speed than old APX (about 1/2 stop) if developed like the old film at 20 minutes in Rodinal 1+50.
Extended developing times showed in our first tests a true increase in speed up to 650 ASA in some developers (but not in Rodinal).
We donīt know if the final product will have these outstanding parameters as well. For sure it will have a true 400 ASA unlike the old product and it will have a finer grain.
Overall push capabilities will be better so that AP 400 new can be pushed up to 800 ASA with hardly any visible loss in shadow detail and tonality.
I will keep you updated about the project. At this point we expect 35mm and 120 films to be available in Oktober but we might have delays so take this as a current plan but not a final release date.
Sheetfilms will take about 3 months longer because construction at the factory is going on in the hall which will be the sheetfilm confectioning later.
Both page 10 of this July, 2003 Agfaphoto data sheet
Originally Posted by ADOX Fotoimpex
and page 2 of this A&O Rodinal data sheet
list 30 minutes at 20 degrees C for APX400 at 1+50.
I hope ADOX PAN 400 ends up requiring the same extended time. My reason is that ambient temperatures here in southern California, both air and "cold" water, are very high much of the year. It would be one of the few combinations available that permit reasonably long times when developing sheets with continuous agitation on a Jobo processor in Expert drums under such conditions.
If our versions of Rodinal datasheets list different times for the 1+50 dilution this has not come to our attention because we are not yet in this type of testing status where we change dilutions or even developers.
You test an emuslion for different developers and times when it is all finished. Ourīs isnīt yet and we run type to type comparison in D76, cross checking in Rodinal (1+25 for 10 minutes).
In the 1+25 dilution both our datasheets match so no problem there.
Whatever you do to an emulsion, even if itīs only a small change, has usually an affect on itīs developing kynetics. Thatīs why we need developing timetables for b/w at all and thats why times change anytime a manufacturer does something to the film.
I think for Tmax there were three different devtimes released over the past 5 years whenever Kodak touched it to improove it.
If Agfa changed the 1+50 time for Rodinal in 2003 the reason was that they did "something" to the emulsion. Whatever it was.
Agfa's US Rodinal data-sheets were quite different to the European version for a long time, at least from the mid 1980's. It was almost as if the developer was a slightly different original concentration, and Agfa did change that concentrate in Europe over the years, at least twice after the merger with Gevaert when they reformulated Rodinal.
Yes, I understand that the ADOX PAN 400 emulsion will be different than APX 400. However, as long as your product development started from the last (2003) incarnation of APX 400, I'm confident that times in Rodinal 1+50 will be long, if not exactly 30 minutes. "Long" is all I need to be a happy consumer of the new film!
Originally Posted by ADOX Fotoimpex