Minolta CLE shutter on AE problem
Anyone with experience with a CLE, especially with intermittant issues with shutter speed? On AE, at times the shutter remains open longer than it should and overexposes by at least 2 or 3 stops. At other times, AE works fine and the film is exposed just right. This behaviour seems to occur for about 1/2 the AE exposures.
For example, I expect a shutter speed of about 60 sec based on light conditions. However, when I release the shutter on AE, it sounds more like 1/4. I can then switch to manual, set it to 1/60 and the exposure is fine. When the film is processed, the AE frame is grossly overexposed and the manual frame is properly exposed.
Manually setting shutter speeds seems to be OK. If I can't figure this out, it needs to go back.