Where have you got your Barnack repaired and what did it cost?
[Moderator's note: Typo in title corrected.]
My Leica IIIc, which by chance I have used to shoot most of my favorite 35mm photos over the years, needs work. Shots show a blown out line running vertically through the frame, indicating that the second curtain does not close all the way. They also show horizontal streaks from the above-mentioned vertical line to the edge of the frame, indicating that the gap remains when advancing the film.
I took it in to Steve's Camera in Culver City, CA, which is the normal repair shop on which I have settled. He is reputed to have a lot of knowledge on these cameras.
Steve checked out the camera and gave me an estimate. The camera needs a CLA and new shutter curtains. The parts are $150. Labor is $235. Additionally, a CLA on my Summitar would be $125 labor. The lens service is not absolutely needed, but it does have a relatively big hair in it and the aperture ring is a bit stiff, especially in cool weather.
I would like to know a few things.
1. Have any of you ever used Steve's Camera for Barnack Leica repairs/service? What were your experiences?
2. Does this quote seem in line with other quality Barnack Leica repairs/service? The quote on the lens definitely seems high, considering it is in much better shape than the Canon FD lens they overhauled for $45, and much easier to service. It just needs to be cleaned and lubricated. I am also leery of spending $150 for parts that are obviously going to be used. How will he make sure the parts aren't going to go south overnight like mine did?
3. There are a few other recommended repair people. Krauter was the last name of one of them, and the other was in Canada, I believe, and may have been three initials (DAG?). I also want to hear experiences and prices at these two places.
Thank you in advance!