Not really. The problem was adjusting the film backs to use the thin based film. It was supplied as motion picture and as 120 film both. One used in the capsule mo-pic cameras IIRC and on the ground, and the other was for the Hassie in orbit and on the moon. (oh, I forgot, the moon stuff was all faked. :D )
The ground motion picture was such high speed, they needed thin film to get more footage into a standard magazine. I've mentioned before that I saw it jam and spew the camera guts along with sprocket gears all over the test lab.
The high speed camera had a gear shift type of arrangement to get up to speed so as not to damage the equipment by a sudden jolt of full power. This is also true of high speed coating machines coating polyester. They ramp up to coating speed. This of course, wastes a lot of start up footage so you have to want to coat a lot of film to make a profit and overcome waste. Experiments are done at very low speed to eliminate this problem.
Also, you must remember that polyester cannot be coated on directly. It needs a corona discharge to pre-condition the film to accept the aqueous gelatin emulsion.