Ironically the paper is on 'back order'! I wonder where you collected it from BUT the chemicals to make 40 gallons of bleach/fix arrived.
Hi Paul, Which store did you collect from?
Dave, you asked for an opinion on this paper - Posting my comments here as it may be of interest to others.
It is at the budget end of Kodak's range and that shows in the thickness of the paper. Measured 0.20mm thick compared to 0.24mm for Endura of Fuji Crystal (Ilford MGIV portfolio is 0.30mm by comparison). Being on a heavy roll, it is a bit of a pain to cut in to usable sheets - A custom made papersafe would be an advantage, looks like I'll be hacking up some ½" MDF tomorrow.
To my (untrained) eye, colour rendition is acceptable and I would be reasonably happy to show the prints once mounted. At £10 per roll, I'm quite happy to use this stuff for much of my colour printing.
Glad the paper isn't fogged!..........Just having pushed a few buttons on my calculator. If you got two 186M rolls for a tenner that is...
2x186=372M or 37200 cm's / 25 (10") that will give you 1488 10x8 prints at 0.672p per print...not bad ah?