Well I've got as far as I can with my current project which is why I started this thread, but I can't do Brass-work.

Screens no problem , I've made 12 new ones and re-ground another 4 or 5 over the past 2 days and also made 2 sets of bellows.

But I'm stuck with two fittings similar to the brace for the fronts standard and the brass plate & knob that control the rise/fall. On my camera the plate is fixed to the standard and the slot matches with a hole on the lens board (other way around to the image here).



Any help would be appreciated. This is the camera - virtually fully restored. More in this thread.





Ian