Hi Steve - The pins need to be well-seated for sure. Make sure everything is clean and free of burrs. If your pins did not survive the extraction process intact, then you may get play in the mechanism. This is not good because it will greatly accelerate wear, and of course, the dang thing will not fire reliably. If you are worried about your pins, please drop a PM. I purchased a bunch of pins a while back and I could probably dig them up with enough time and encouragement.

Good luck,

Quote Originally Posted by Sirius Glass View Post
The pin came out after I put WD-40 on it to soak in for 24 hours. Today I found that the trigger-mirror-shutter linkage is not always working and that the H lever wobbles. I am waiting to hear from Bert before I decide to tape the pin in further or make another adjustment first.