O.K., now that I've got the chemical thing down, the other issue I've had is my prints are way to dark, with to little time under the light. I have a UV, 150 watt bulb in a bowl shaped reflector from Lowes sitting about 40" above the print frame. The times are around 3 seconds with Azo G2, and 1 1/2 seconds with G3 Lodima. From what I've read, I've been leaving the prints in the developer to long (2 to 2 1/2 min), but I still think there is a problem with the exposure. I should be needing longer exposures. I don't use a diffuser, but will try that next.