Thanks, I checked and i'm using the same R40 flood, Canadian G2, and about 40" above the table, so it must be an issue with the developer. My negs are also a bit thin, so I'm going to try some 4X5 negs that are a bit more contrasty. Although I've not shot with Super XX or TMY, I do have some negs from FP4 that I developed in HC110. Lately I've been using WD2D+, so my negs look a bit thinner than with other developers. I use a digital timer and set it for however many seconds I get after doing a strip test. I'll keep at it with the advice I'm getting till I get it right.