I'm still in the process of collecting data and materials.
It looks like the Quantum Turbo battery can't be used for the Metz CT60-4 flash. The CT60-4 flash head needs ground, 6VDC, and 330VDC (I'm actually using a 7.2V Li-Ion battery, so it gets ground, 7.2VDC, and 330VDC). The low voltage output from the Quantum Turbo is 8V. I'm not sure I want to feed 8VDC to the CT60-4.
But for now, it looks like if a flash can use the Quantum Turbo, it can be used with the Metz 60CT power pack. I just feed it ground and 330V.
That diagram is NOT for the CM4 cable (Quantum Turbo to Metz 45CT-4, 45CL-4). The correct diagram is as below:
Originally Posted by wiltw
Note: the cable from Quantum has ground for the shield, pin 6 and pin 7. The cable from Paramount has ground for pin 7 only; pin 6 and the shield are not connected.
Last edited by bigspecbear; 03-01-2011 at 08:30 PM. Click to view previous post history.