someone on here told me dialing in cyan neutralizes the y/m being dialled in, thus making it useless but i am not sure if it is the case... also you have no Y dialled in. on fuji crystal archive with a jobo head i used: M80 Y65, got great results. works well also with kodak supra III too. hope this helps! you dialled in nowhere near enough magneta, and no yellow which you need!) dont bother dialing cyan for negative film. weather fuji type ii is similar to crystal archive i don't know
hope this helps as a starter point! i was pulling my hair out while trying to do this, wasting sheet after sheet (yellow and magneta casts) so i eventually meditated on it and asking guidance (yes im crazy!) and they were the values i got... worked like a charm and saved me hours and loads of sheets (i was going around the 40/50/60 range with both)... i heard jobo heads have slightly "more" on their dials than others? i also bought some veiwing filters as per suggestions which will help!
the values for the old tetenal paper i had were Y71 M66 (meditation), but give both values ive given a try as a starter point if you are not dialing in enough, but as i said ive never used type ii so i dont know, the sheets also are cyan when new take one out, seal the box and look under the lights) so make sure theres enough development (developed to completion so dont worry about going over) and enough exposure too. i found 3.5 seconds at f.8 at 8x10 in optimal for not-so-dense negatives and 4.5 - 5 seconds for properly exposed negatives.
have you ever printed ra4 before? i would practice on the cheapest smallest sheets you can find!
Last edited by jm94; 06-05-2011 at 10:09 AM. Click to view previous post history.