I am fashioning an enlarger stand from two cabinet bases. That way I can have a side for drawers and one for shelves with doors. The issue is they cost an arm and a leg. I only got two of each and I need them. So, I am looking for something cheap. (Home Depot wants about $100 for each unit and I don' t want to pay that much) Then I will put a 3/4 inch plywood top on it and then make that drop table David was talking about. I don't think I will formica it thou. Too much work. Right now, I have installed a 2x4 at the hight I wanted minus the 3/4 inch plywood and then I just screwed the plywood to the 2x4 and added legs at an angle from the wall to the edge of the plywood. Took about an hour to build. The other stand will take longer of that I am sure.