jjbonbon - Welcome to APUG!!! Glad to see you doing it yourself! I have learned that following the Digibase instructions to be very wonderful.
To answer you question, yes, mix all the parts of the devloper up to make a working solution (Water, part A, part B, part c and starter). You do similar with the bleach, fix and stabilizer, just follow the above. You make enough working solution to cover your film. If your tank needs 500 ml, then make a min of 500ml of working solution, not 250. Ultimatly your tank will dictate what you mix up. If you bought too small amount of chemistry, you might need to buy more to make enough working solution, so check your tank, and then what you bought to ensure you have what you need to cover the film accuratly.
However, as Photo Engineer mentions, a wash after the Bleach and after the Fix is recommended (see his reply above).
Read every page of the below thread and you will know what I am taking about. Greg (a C-41 pro) concludes, like Photo Engineer, that a wash after the Bleach and Fix is the best course of action to preserve your chemistry/negatives.
Welcome to Apug and I wish you continued stellar photographs!
I believe the below is required Rollei Digibase reading....
Last edited by zsas; 08-11-2011 at 08:44 PM. Click to view previous post history.
Reason: Meant wash not rinse