Since I mostly develop by inspection and don't use a timer, I have no precise times...

However, I did two batches in JOBO tank (inversion, 1.5liter solution): The first, at 9 minutes, was too thin for my taste; the second was a bit too much at 12 minutes. Somewhere around 10.5 minutes seems to be right.

When I develop in trays, I can usually see the negative (poor light-proofing) after about 6 minutes. Four more minutes sounds right(ish), but this is (more or less) continuous agitation.

I don't use any kind of safelight for this, just my sloppy lightproofing. I have not seen any tendency to fog on any of the film I have used so far, but I did fog one when I tried with a dark green safelight after 8 minutes development...