So, I happened across one of those Lomo 360 spinner cameras. And so, I'm thinking, if you take an RB67, put a slit in the dark slide and put a gear on the take up spool, would you have a good chance at making a 360 degree spinning medium format panoramic camera, likely with good image quality and under $500? I'm thinking the hardest part is going to be breaking the back so the take up spool rotates freely, but it can't be that hard. The rest is pretty easy, two plates under the camera that it mounts to, one rod comming up the side of the RB67 which rotates the top of the take up spindle. Then just add a motor and some rotation.