I've developed yesterday nigh a Tmax 100 35mm film.
HC-110, Dil B 6 min, 21 C, agitation 5 full inversion of the tank each minute.

Never before saw such a problem neg.

- Streaks all over, side to side between perforations.
- A whitish/brownish very dense spot (changes with light angle) at the side, between frame and perforation.
- a milky streak some 3/4 inches long between film perforation and outside.

If this was not enough, due to a camera battery problem 3 frames were grossly underexposed.


Well, in your opinion would the above be related to development or the film itself?

Thanks for any help,

Jorge O