Temps: 20C before pouring the developer. I never measured the temps after development.

EI: Box Speed, but I had K2(Yellow filter) so I set my incident meter ISO=50 and measured EV 14(It was sunny on top of the mountain). I had everything on that negative to print.

Yes, the meter was facing the camera. :-)

Unfortunate I do not own a scanner, I will try to give it to the lab to get it scanned during weekend.

I am no expert in processing film but I follow this http://www.apug.org/forums/forum216/...-negative.html also I never tested with any other agitation methods so I cannot comment about other times.