I have a donor body with nicer eyelets and thought about swapping the eyelets
I took off the top cover and saw the pin but could not figure out how to take it out. The eyelet itself has some clearance but I could not find a way to take out the pin. It is not a micro allen bolt and no protruding part to hold on.
Oh and I assume this tread is for DIY repairs/mods so I don't have plan to take it to repair shop soon
I don't know exactly how it's pinned so I can't give any specific advice, except to say be careful or you could damage the chassis trying to get it out. If it's a plain pin then it's press fit and you need a small punch to drive it out. If you can't get it out a repairer can do it quickly. Shouldn't cost much.
Last edited by lxdude; 07-10-2012 at 07:47 PM. Click to view previous post history.
I do use a digital device in my photographic pursuits when necessary.
When someone rags on me for using film, I use a middle digit, upraised.