Need Help Deciding on Light Meter
I'm trying to decide between the following light meters:
- Sekonic L758DR
- Kenko KFM-2100 (identical to the Minolta Flash Meter VI)
- Gossen Starlight 2
One differentiating factor is how the Kenko measures indicident light for lighting ratios and flat subjects. For the Kenko, you take off the half-dome diffuser disk and put on a flat diffuser disk; for the Sekonic and Gossen, you retract the half-dome diffuser disk into the body of the meter. I currently use a Minolta AutoMeter III, which uses dedicated flat and half-dome diffuser disks, same as the Kenko. A lot of my subjects are flat (macro, artwork, etc.) and so I use the flat diffuser quite a bit. The Sekonic/Gossen retraction method seems fine for measuring lighting contrast ratios wherein you point the meter directly at the light, and in circumstances where light is falling directly on the subject more or less from camera angle. However, if you are measuring a flat subject and the light is coming in at an oblique angle (i.e. sidelit), the retracted half-dome would be partially in shade from the collar that surrounds the half-dome and from the half-dome itself. In such cases, the Sekonic and Gossen would seem to inject a lot of error into the measuring process.
- Am I wrong about the flat vs. retracted half-dome issue in side-lit setups, and if so, why?
- When Kenko cloned the Minolta AutoMeter VI, it made no changes to the original design. In what way would it be dated relative to the newer offerings from Sekonic and Gossen.
- Any other factors to consider?
- Any recommendations?
Any insight would be very helpful, and thanks in advance.
Last edited by jaydub; 09-02-2012 at 06:21 PM. Click to view previous post history.