I'm not clear what kit you are using, but in general, you use the developer first, then bleach, then fix, then stabilize. In many kits, the bleach and fix are combined into one solution.
Originally Posted by morrisphotos123
So normally you have either 3 or 4 solutions for C-41 process. If you have 6 chemicals (and assuming your kit is really for C-41 processing and not E-6), then you probably have two or three developer solutions that have to be mixed together before use.
What kit do you have? If it didn't come with directions, then I would suggest you contact the merchant and ask them for it.
EDIT: I noticed your link above. You are using the Tetenal C-41 1 liter kit. That is a very popular kit with a lot of people. I haven't used it, but it definitely should have come with an instruction sheet, or else the instructions would be on the box. Someone here on the forum should be able to give you the details, if you don't have them.
Last edited by SkipA; 09-21-2012 at 12:34 PM. Click to view previous post history.