After much deliberation, I am thinning the darkroom herd, and have to make room so I can actually print this winter with the gear I am familiar with and used to using. So up for sale is a Beseler 45 MCRX enlarger with a working computer dichroic head and a non working spare head for parts if needed. The enlarger base has a wider, and longer base board on it that was there when i got it many years ago? It also comes with a footswitch and Gralab 450 timer. I would like $225 for this. I will ship(buyer pays) but it will be costly, but local pick up more than likely best. I am in Eastern suburbs of Minnesota.
I also have 2 working 4x5 zone IV cold light heads. The earlier non vc type with the ability to fit onto the Beseler 45 collar. Complete with diffuser panels. I would like $100 a piece for these plus shipping.
Also for sale is a 150mm f5.6 Schneider Componon enlarger lens mounted into a Beseler lens board with 39mm locking ring, and the cap for the lower element. I would like $90 for this plus shipping.
Then there is the Zone IV 14x11 print washer. I would like $185 plus shipping for this. Will also likely be spendy to ship as its quite a heavy beast.
Adding a Nikon 105mm F5.6 enlarging lens also. Comes with plastic bubble container and original box I'd like $65 plus shipping for this lens.
Here are a few pictures... more pictures to come tomorrow.
2 x zone VI cold lights.jpg nikon 105mmf5.6.jpg Spare Dichro Head.jpg Zone Vi print washer.jpg