That is the same discussion.

I always follow manufacturer's recommendation. I believe they know better than everyone else. Sure you can take a chance, but I do not.

Same with the discussions on having safelight in color printing, tray color processing and not wearing gloves with color chemicals. You may be able to get away with it most of the time. But they are not recommended.

But glad to know that people having success with using 28xx drums with 8x10 films. I have several of them. If this is the case, then the 3062 and 3063 should be good too.

But I do not see any problem if you only process one single sheet of 8x10 with 25xx tanks. There are no rails and no overlapping.